Heating Radiator Cleaning Tips | How to Heat Efficiently?

Heating Radiator Cleaning Tips | How to Heat Efficiently?, How to Clean the Radiator Radiator? Clean the Inside of the Radiators

As every autumn, it’s time to turn on the heater again. You ‘ve probably wondered how to clean the heater core and what are the tips for cleaning the radiator .

In fact, cleaning is an important issue for radiator efficiency . This can be achieved with proper cleaning and little tips and can make your life much easier if put into practice. Then, you can reduce your bill expense by acting correctly. We have compiled what you need to know about heating radiator cleaning in this article.

How to Clean the Radiator Radiator?

Cleaning the heater core correctly ensures that they are more efficient and therefore heat more. This allows you to get maximum efficiency from the honeycombs without having to raise the temperatures too much. This way, you can stay warm without being exposed to high natural gas bills.

In fact, you will see that bill costs are significantly reduced thanks to proper cleaning. You are aware of how important even the smallest difference can be today. So, let’s consider together what are the rules to follow to increase the efficiency of radiators.

Clean the Radiators from Dust
The first thing to do when cleaning radiators is to remove dust that tends to accumulate over time. You can do this with the help of a vacuum cleaner and a dust-absorbing cloth. In this way, radiators are cleaned and can perform their duties in the best possible way.

Clean the Inside of the Radiators

You can do the following steps to get rid of dust and spider webs that get stuck between the radiators:

First, remove the screw that fixes the grill on the top.
Then, to clean the heater core, remove the metal parts on the sides by lifting them up.
You can now easily remove the empty upper grille.
You can clean between the radiators with a dust removal device. Or you can get rid of the dirt by wrapping a damp cloth around the end of a long, thin stick.

How to Clean the Heater Radiator at Home?

If you are going to clean the radiator yourself, first turn off the boiler.
Then drain the water from the radiators using the drain valve in the bathroom.
After the water is completely drained, disconnect the pipes from the radiator using valves.
After disconnecting, you can remove the radiators from the wall and take them to the bathroom to wash.
Afterwards, continue cleaning by squirting water into it.
After the cleaning work is completed, add water to the system again through the valve.
Finally, we can start the boiler again by bleeding the radiators.
After the necessary procedures for cleaning the radiator, you can have peace of mind and live in a healthy environment.

How to remove air from the heater core?
It is very easy to bleed the heater core with the help of a flat screwdriver. To do this, turn the air vent on top of the honeycomb clockwise. Release the air until hot water comes out. As soon as the water comes out, tighten the screw and close it immediately. Thus, you can solve the problem of not heating by getting rid of the air in the radiator.